Summary
The Cooper&Hunter Light Commercial Slim Duct systems present an efficient and discreet cooling and heating solution, ideal for installation in attics and ceiling crawl spaces. These units are designed to minimize energy loss commonly seen in central ducted systems.
With available capacities ranging from 9K-24K and 36k-60K in Single-Zone Light Commercial Applications BTU/h in Multi-Zone and an impressive efficiency of up to 20.5 SEER, these systems adapt flexibly to varying architectural demands, allowing ducts to be directed into different areas under a single wall thermostat control. This setup not only enhances comfort but also ensures a streamlined, hidden installation that complements any space without intruding on its aesthetics.
This system is capable of heating even in ambient temperatures as low as -13°F for standard units, and as low as -22°F for Hyper Units, making it perfect for a variety of applications, from bedrooms and additions to living rooms and commercial spaces.
Important
All units must be installed by a licensed HVAC professional for the warranty to be valid. Registration is required within 60 days of installation and can be completed online or by phone. The installation kit is necessary for the system to function. Ensure that you have selected the desired installation kit above. This kit comes with Pre-Flared 99% Copper Lines, Data Communication Wires, PVC Drainage Attachment, Wrapping Bands, etc.
What's Included
- Indoor Unit CH-M18DTUI (18,000 BTU 230V Slim Duct, Concealed Duct Air Conditioning Unit)
- Optional, Pre-Flared 99% Copper Installation Kit (16ft, 25ft or 50ft.) MUST BE SELECTED ABOVE.
- Wireless Remote Control
- Installation Manual
- User’s Manual
- Manufacturer Warranty
Compatible Standard Outdoor Units
| Capacity | BTU | SKU |
| Dual (2) Zone: | 18,000 BTU | CH-18MES-230VO |
| Dual/Tri (2 or 3) Zone: | 28,000 BTU | CH-28MES-230VO |
| Dual/Tri/Quad (2, 3 or 4) Zone: | 36,000 BTU | CH-36MES-230VO |
| Dual/Tri/Quad/Pent (2, 3, 4 or 5) Zone: | 48,000 BTU | CH-48MES-230VO |
| Dual/Tri/Quad/Pent (2, 3, 4 or 5) Zone: | 55,000 BTU | CH-55MES-230VO |
Compatible Hyper Outdoor Units
| Capacity | BTU | SKU |
| Dual (2) Zone: | 19,000 BTU | CH-HPR19M-230VO |
| Dual/Tri (2 or 3) Zone: | 28,000 BTU | CH-HPR28M-230VO |
| Dual/Tri/Quad (2, 3 or 4) Zone: | 36,000 BTU | CH-HPR36M-230VO |
| Dual/Tri/Quad/Pent (2, 3, 4 or 5) Zone: | 48,000 BTU | CH-HPR48M-230VO |
| Dual/Tri/Quad/Pent (2, 3, 4 or 5) Zone: | 55,000 BTU | CH-HPR55M-230VO |
Sizing and Compatability:
Combination Chart
The capacity and number of systems can vary for each outdoor unit. Consult the combination chart for potential loading configurations. Ensure the total capacity of all connected indoor units aligns with the minimum and maximum loading range of the selected outdoor unit. It is not mandatory to utilize all circuits on an outdoor unit; some circuits may remain sealed without an attached indoor unit.
Warranty
- 7 year compressor limited warranty
- 5 year parts limited warranty (must be installed by a licensed HVAC technician)
- 1 year remote control
Technical Information
Model Number: CH-M18DTUI
| Specification | Details |
| System type |
Single/Multi-zone unit
|
| BTU Rated | 18,000 |
| Power source |
208-230V, 1Ph, 60Hz
|
| Dehumidification value (pnt/day) | 3.74 |
| Voltage range (V) | 187-253 |
| Packing dimensions (WxDxH) |
42.13x28.54x11.02
|
| Controller |
RG10K-exclusive remote & 120X or 120N wire controller
|
| Refrigerant piping Liquid/Gas side (inch) | 1/4" - 1/2" |
| EER2 | 12.5 |
| SEER2 | 20 |
| Unit Net/Gross weight |
55.34/67.02
|
| Unit dimensions (W*H*D) |
34.65x26.54x8.27
|
| Operation Range - Heating | 32～86 |
| Operation Range - Cooling | 62~90 |
| Minimum circuit ampacity | 3 |
| Max. fuse | 15 |
| Indoor Noise Level H/M/L | 42/38/35.5 |
| Indoor Air Flow |
529.41/450.00/370.59
|
| ESP Range | 0-0.4 |
| Drainage water pipe diameter | 1" |
Certifications
Performance Data/Features
-
Efficiency and Design: Boasts up to 20.5 SEER, offering an efficient and discreet cooling and heating solution. Ideal for installation in attics and ceiling crawl spaces, designed to minimize energy loss compared to central ducted systems.
-
Flexible Installation: The system's ducts can be directed into separate areas, all controlled by a single wall thermostat, ensuring a streamlined installation that remains hidden and complements any interior design without intruding on space aesthetics.
-
Extreme Temperature Operation: Capable of heating in ambient temperatures as low as -13°F for standard units and -22°F for Hyper Units, making it versatile for various applications including bedrooms, additions, living rooms, and commercial spaces.
-
Optional Accessories: Available pre-flared 99% Copper Installation Kit (16ft, 25ft, or 50ft) must be selected as per installation needs.
-
Control and Documentation: Includes Wireless Remote Control, Installation Manual, User’s Manual, and Manufacturer Warranty for comprehensive support and easy operation.
